
Motor Name:
506G
RPM: 34
Volts: 120V Amps: .9
Min. Shade Width: 24” om
Standard Motor Lead Length: 6’
Lead Type:
18-3 w/ground
Limit Type: Turn Screw
Special Notes:
This quiet motor does not have a crank
override option, and it does not fit into all
hardware._Used for shades either too small
or too large for standard quiet motors.
Decibels--42
Installation Procedure:
1. Install hardware for shade
2. Mount motor and test limits and operation
3. Let electrician tie into controls
4. Program controls
5. Test operation through controls
Controls that motor can wire into: Isolating Relays, SC1 controllers, GC4 control, SGC4 control,
SPGC4 control, Keyed Wall Switch, SP/DT toggle switch, DP/DT toggle switch, Animeo for questions
on other controls ask Draper, Inc.
Hardware Restrictions: Cannot go into Duals, Access Pocket,
Ult. Access, Lightblocs, Flexshade 2, Skylight and Colossal.
Plug Options: Wago w or w/o wall plate
Anderson w or w/o wall plate
Optional Lead Lengths: 30’
Part No:
C047.134.001
Product (s) Used In: Motorized Flexshades
Roller Diameter Choices: 2” aluminum, 2” steel, 2 1/8”
Steel, 3” steel, 3 1/8’ steel
Parallel Wire:
No
Torque in Nm: 6
Motion Control Motor
Comentarios a estos manuales